This was acquired from a boat being refit with new electronics. This transducer was tested on a TDT1000, the gold standard in transducer testing, and tests in range. The results of the actual test on THIS transducer are in the photos.

We are including a new, uncut tank, as well as the cork liner, and of course, all bolts and plugs.

It has 40′ total cable length - the cable was cut about 5' from the transducer, so we are including a 35' length of Airmar Dual-Line transducer conduit to extend the total length. We are also including an Airmar splice box to make the connections. We have a 90 day warranty, but this warranty does not cover overheats – it is imperative that fluid is ALWAYS present in the tank. The tank must not leak – if you have a leak, you will lose fluid and overheat the transducer.

The photos of the installation manual are not present, but it IS included.

This is an excellent choice for the DFF3, FCV-295, FCV-1150, etc. It can also be used on certain Simrad Sounder Modules, and can be made to work on the Garmin GSD26, but manual programming may be required. If you have a unit and you are unsure of compatability, ask and we will advise.

Thanks for looking.