Summary

• WAGO 282-128 two-conductor DIN rail fuse terminal block from the 282 Series, supplied with a compatible WAGO 282-312 orange insulating end plate for industrial electrical installations, machinery, automation equipment, and control cabinets.
• The WAGO 282-128 features a screw-cap fuse holder designed for standard 1/4 x 1-1/4-inch cylindrical cartridge fuses, two CAGE CLAMP conductor connections, and a compact 13mm-wide gray insulating housing. The terminal block has nominal IEC ratings of 500V and 10A, with actual circuit protection dependent on the installed fuse and applicable electrical requirements.
• The included WAGO 282-312 orange end and intermediate plate measures 4mm thick and is specifically listed by WAGO as a compatible insulating accessory for the 282-128 terminal block. The plate helps complete and insulate compatible DIN rail terminal assemblies.
• Listing is for one WAGO 282-128 fuse terminal block and one WAGO 282-312 orange end plate only, does not include a cartridge fuse, DIN rail, wiring, additional installation hardware, instructions, or original box. Please review all photos for the exact item, condition, and components included.
• This item was sourced from a new, uncommissioned equipment cabinet that was dismantled prior to being placed into service.

Product Description

• The WAGO 282-128 is a two-conductor fuse terminal block designed for convenient DIN rail mounting and fused circuit connections in industrial automation equipment, electrical distribution panels, machinery, and control cabinets.
• Part of WAGO's 282 Series, this terminal block combines a screw-cap cylindrical cartridge fuse holder with WAGO CAGE CLAMP spring-pressure conductor termination technology, providing a compact and serviceable fused connection point.
• The integrated fuse receptacle accepts compatible 1/4 x 1-1/4-inch cartridge fuses. The screw-cap arrangement allows the fuse to be accessed for inspection or replacement as part of properly isolated electrical maintenance procedures.
• The 282-128 is rated for a nominal IEC voltage of 500V and current of 10A. Actual circuit voltage, current, and protective characteristics must remain within the terminal block's specifications and the ratings of the selected fuse.
• The terminal block provides two conductor connection points through WAGO's CAGE CLAMP technology, using spring-pressure connections rather than conventional screw-clamp wire termination.
• Compatible copper conductor sizes range from 0.2mm² to 6mm², corresponding to 24–10 AWG, depending on conductor construction. WAGO specifies a wire stripping length of 12–13mm.
• Its horizontal housing design provides side-entry wiring and is designed for mounting onto standard 35mm DIN rails, including compatible 35 x 7.5mm and 35 x 15mm rail profiles.
• The terminal block features a gray polyamide PA66 insulating housing with a UL 94 V-0 flammability classification. Its compact 13mm width supports organized electrical panel construction and convenient installation alongside compatible rail-mounted terminal blocks.
• This version is manufactured without a blown-fuse indicator. Fuse status must be evaluated using appropriate maintenance and electrical testing procedures.
• The package also includes a WAGO 282-312 orange end and intermediate plate. This 4mm-thick insulating accessory is identified by WAGO as compatible with the 282-128 and is used to close or separate applicable terminal block assemblies.
• The orange end plate measures approximately 62mm high and 46.4mm deep, providing a matching accessory for the 282 Series installation system.
• Together, these components provide a compact fuse terminal assembly suitable for replacement, maintenance, industrial control cabinet construction, and compatible machinery wiring applications.
• A cartridge fuse is not supplied with this listing. Buyers must select an appropriately rated and approved fuse for the intended circuit and verify the complete installation before energizing.

Product Information

• Brand: WAGO
• Manufacturer: WAGO
• Model Number: 282-128
• Series: 282 Series
• MPN: 282-128
• SKU: 282-128
• Type: Fuse Terminal Block
• Product Category: DIN Rail Fuse Terminal Block
• Fuse Holder Type: Screw-Cap Cylindrical Cartridge Fuse Holder
• Compatible Fuse Size: 1/4 x 1-1/4 Inch
• Cartridge Fuse Included: No
• Blown Fuse Indicator: No
• Number of Conductor Connections: 2
• Number of Connection Points: 2
• Number of Levels: 1
• Number of Potentials: 2
• Connection Technology: CAGE CLAMP
• Termination Type: Spring Clamp
• Conductor Entry: Side Entry
• Compatible Conductor Material: Copper
• Nominal Conductor Cross-Section: 6mm²
• Compatible Wire Gauge: 24–10 AWG
• Solid Conductor Cross-Section: 0.2–6mm²
• Fine-Stranded Conductor Cross-Section: 0.2–6mm²
• Wire Stripping Length: 12–13mm
• Nominal Voltage (IEC): 500V
• Nominal Current (IEC): 10A
• Circuit Protection Type: Replaceable Cartridge Fuse
• Mounting Style: DIN Rail
• Compatible DIN Rail: 35mm DIN Rail
• Compatible Rail Profiles: 35 x 7.5mm / 35 x 15mm
• Housing Design: Horizontal
• Housing Color: Gray
• Housing Material: Polyamide PA66
• Housing Flammability Classification: UL 94 V-0
• Terminal Width: 13mm
• Terminal Height: 62mm
• Terminal Depth: 56.5mm From Upper Edge of DIN Rail
• Approximate Terminal Weight: 26.9g
• Continuous Operating Temperature: -60°C to +105°C
• Processing Temperature: -35°C to +85°C
• Manufacturer GTIN / EAN-13: 4044918558563
• Included End Plate Specifications
• Brand: WAGO
• Manufacturer: WAGO
• Model Number: 282-312
• Series: 282 Series
• MPN: 282-312
• Type: End and Intermediate Plate
• Product Category: DIN Rail Terminal Block Insulating Accessory
• Compatible Terminal Block: WAGO 282-128
• Compatible Series: WAGO 282 Series
• Color: Orange
• Thickness: 4mm
• Height: 62mm
• Depth: 46.4mm
• Mounting Application: Compatible Rail-Mounted Terminal Assemblies
• Function: Terminal Assembly End Insulation and Separation
• Quantity: 1 End Plate

Included

• 1x WAGO 282-128 DIN Rail Fuse Terminal Block
• 1x WAGO 282-312 Orange End and Intermediate Plate
• Total: 2 Components

Not Included

• Cartridge Fuse
• DIN Rail
• DIN Rail End Stops
• Additional Fuse Terminal Blocks
• Additional End Plates
• External Wiring or Cables
• Additional Mounting Hardware
• Installation Screws
• Installation Instructions
• Original Manufacturer Packaging
• Other Electrical Installation Accessories

Please review all photos for the exact item, condition, and components included.