Manufacturer: SeaStar Solutions
Model Number: AP2419
Series: SeaStar Autopilot Pump - Type 1
MPN: AP2419
Listed Item Condition: New/New Other
Summary
- The SeaStar Solutions AP2419 is a Type 1 marine hydraulic autopilot pump designed for 24V DC vessel steering systems. Featuring a fixed-flow reversible hydraulic gear pump, the AP2419 delivers a manufacturer-rated no-load flow of 60 cubic inches per minute and supports compatible marine autopilot steering installations. Its compact, corrosion-resistant construction, long-life DC motor, and quiet operation make it suitable for marine hydraulic steering applications.
- The AP2419 can be installed as a standalone hydraulic autopilot pump or mounted to a compatible existing SeaStar Power Assist unit. It supports compatible SeaStar hydraulic steering systems and is intended for applications with appropriate steering cylinder capacities and an externally supplied autopilot pump control system.
- This item is new old stock (NOS), brand new, never used or installed, and supplied in its original unopened manufacturer box. The pump is identified as made in Canada. The original packaging has never been opened, and the pump has not been independently powered on or tested. Minor exterior packaging wear from storage and handling may be present. Please review all photos for the exact item, condition, and packaging included.
Product Description
- The SeaStar Solutions AP2419 Type 1 Hydraulic Autopilot Pump is a professional marine steering component designed to provide controlled hydraulic fluid flow for compatible autopilot systems operating on 24V DC electrical power.
- This reversible autopilot pump is engineered to integrate with hydraulic steering systems, allowing a compatible autopilot controller to direct steering fluid to the appropriate side of the steering cylinder. By reversing motor operation, the pump enables the autopilot system to make automatic port and starboard steering corrections.
- The AP2419 incorporates a fixed-displacement hydraulic gear pump with an electric DC motor. Its design provides controlled hydraulic fluid movement while minimizing vibration and operating noise. The motor features long-life brushes and is engineered for marine steering applications where reliable operation and corrosion resistance are important.
- The pump is classified as a Type 1 unit with a nominal no-load flow rate of 60 cubic inches per minute. This corresponds to approximately 984 cubic centimeters per minute and is intended for compatible hydraulic steering cylinders with a capacity of approximately 4.9 to 12.5 cubic inches.
- The AP2419 operates from a 24V DC electrical supply and typically draws approximately 2 to 4 amps during operation, depending on steering load and installation conditions. The pump has a manufacturer-specified maximum hydraulic pressure of 1,000 PSI.
- The unit is designed to operate with SeaStar hydraulic steering fluid and compatible SeaStar hydraulic hoses and fittings. Manufacturer documentation identifies compatibility with standard SeaStar HO51xx hose arrangements, subject to the correct system configuration and installation hardware.
- One of the AP2419's key features is its installation flexibility. It can function as a standalone autopilot pump within a compatible hydraulic steering system or be mounted to an existing SeaStar Power Assist unit. When configured with the appropriate hardware, this arrangement can simplify certain installations by reducing the need to modify existing hydraulic lines.
- The compact motor and hydraulic pump assembly is designed for installation in suitable protected marine equipment locations. The manufacturer identifies a mounting bracket as part of the standard pump configuration.
- SeaStar specifies a 24-inch electrical lead arrangement using 12 AWG wiring, with bare-wire connections rather than a proprietary electrical connector. Correct wiring polarity, conductor protection, motor control, and electrical installation procedures should follow the manufacturer's instructions and the requirements of the compatible autopilot controller.
- The AP2419 is designed for integration with external marine autopilot electronics. It does not independently determine vessel heading, navigate a programmed route, or control steering without a compatible autopilot control system.
- The Type 1 AP2419 should not be confused with the AP1219 12V model or the AP2433 24V Type 2 pump. The AP2433 provides a higher nominal hydraulic flow rate of 100 cubic inches per minute and is intended for different hydraulic cylinder capacities.
- Typical applications include marine autopilot installations, maintenance of existing hydraulic steering systems, replacement of compatible autopilot pumps, vessel steering system upgrades, and integration with SeaStar hydraulic Power Assist equipment.
- Proper pump selection requires matching the autopilot controller, vessel electrical system voltage, steering cylinder displacement, hydraulic plumbing, and operating requirements. Buyers should verify all system specifications before installation.
- This unit is new old stock, never used or installed, and remains inside its original unopened manufacturer packaging. The box has not been opened to inspect the components, and the pump has not been independently function-tested.
Product Information
- Manufacturer: SeaStar Solutions
- Model Number: AP2419
- Series: SeaStar Autopilot Pump - Type 1
- MPN: AP2419
- Dometic Manufacturer SKU: 4457000111
- Product Type: Marine Hydraulic Autopilot Pump
- Pump Configuration: Fixed-Flow Reversible
- Pump Mechanism: Internal Hydraulic Gear Pump
- Motor Type: Brushed DC Electric Motor
- Rated Operating Voltage: 24V DC
- Nominal Flow Rate: 60 Cubic Inches Per Minute (No Load)
- Metric Flow Rate: Approximately 984 cm³/min
- Autopilot Pump Classification: Type 1
- Compatible Steering Cylinder Capacity: 4.9-12.5 Cubic Inches
- Maximum Hydraulic Pressure: 1000 PSI
- Typical Operating Current: 2-4 Amps
- Hydraulic Fluid Compatibility: SeaStar Steering Fluid
- Hydraulic Hose Compatibility: Standard SeaStar Hydraulic Hoses, Including Applicable HO51xx Systems
- Electrical Wire Gauge: 12 AWG
- Electrical Lead Length: 24 Inches
- Electrical Termination: Bare Wire Leads
- Motor Direction: Reversible
- Standalone Autopilot Pump Operation: Supported
- SeaStar Power Assist Integration: Supported with Compatible Equipment
- Mounting Type: Bracket Mount
- Mounting Bracket: Manufacturer Standard Component
- Corrosion-Resistant Construction: Yes
- Low-Vibration Operation: Yes
- Product Width: 121.41 mm / 4.78 in
- Product Height: 168.40 mm / 6.63 in
- Product Depth: 117.09 mm / 4.61 in
- Manufacturer Current Listed Net Weight: 6.55 lb / 2.97 kg
- Country of Manufacture: Canada
- Condition: New Old Stock (NOS)
- Packaging: Original Unopened Manufacturer Box
- Installation History: Never Installed
- Usage History: Never Used
- Independent Operational Testing: Not Performed
- Quantity Per Purchase: 1
Included
- (1) SeaStar Solutions AP2419 Type 1 24V Hydraulic Autopilot Pump Assembly
- (1) Original Unopened Manufacturer Box
- Manufacturer-Standard Integrated Electrical Leads and Mounting Components Supplied with the Pump
Not Included
- Marine Autopilot Control Head or Controller
- Hydraulic Steering Cylinder
- Hydraulic Steering Helm Pump
- External Hydraulic Steering Hoses
- Additional Hydraulic Fittings or Adapters Not Supplied in Original Packaging
- External 24V DC Power Source
- SeaStar Hydraulic Steering Fluid
- Additional Accessories Not Specified in the Original Manufacturer Package
What's Included:
- (1) SeaStar Solutions AP2419 Type 1 24V Hydraulic Autopilot Pump Assembly
- (1) Original Unopened Manufacturer Box
- Manufacturer-Standard Integrated Electrical Leads and Mounting Components Supplied with the Pump