This Airmar/Raymarine B75M-0 transducer is in great working condition! It comes as shown, complete with the hull nut, rubber washer, new collar kit for the cable as well as a new 11-pin single operation adapter cable.

It is a 1000w power output CHIRP transducer with an operating frequency of 80-1300kHz. It has an internal temperature sensor.

This transducer is essentially new, never been installed; however it was used as a demo/display unit and the cable was cut short, about 6 inches from the top of the transducer. We have professionally re-spliced a NEW Raymarine 11-Pin cable onto the transducer. We used multiple layers of sealed heat shrink over the splice to ensure the splice is completely sealed!

The transducer was then retested on a TDT1000 transducer test set, the gold standard in transducer testing. All testing results are passing and included in the listing photos.

The cable length is 10m or 33ft.

Please note: This is the 0-degree version of the B75M therefore it should be installed on hull deadrises between 0-7 degrees. Anything above or below those numbers will result in reduced performance.