Model Number: rdp149
Series: NavNet
MPN: rdp-149
Condition: Remanufactured
Additional Notes: This Furuno RDP-149 was removed from a boat that was refit with new electronics. The unit has been fully tested in-house and found to be 100% operational. Our testing is done using several peripherals (GPS antenna, radar, sounder, etc) which are not included in this listing. The pictures you see here were all taken with this unit, they are not stock photos.
This is a Navionics unit intended to work with Navionics SD CARDS. It will NOT work with C-MAP chart cards. If a C-Map unit is required, we can convert this unit at no charge. A chart card is not included with this purchase.
We have updated the software to the latest version for optimal performance.
The unit was flush mounted so a bracket will NOT be included in this sale.
The unit would make a good replacement for a downed display.
Max Marine Electronics has sold hundreds of Navnet displays and systems. Our experience has given us the ability to evaluate and rebuild these displays in such a way as to prevent the common (and rare) failures these units experience. The most common failures of the Navnet series are LCD Screen Failure, Backlight Failure, Trackball Failure, and Separation of the Front Glass.
An MME refurbished unit will have a rebuilt LCD screen with new films that should outlast the unit. The backlight circuit board has also been rebuilt with beefed-up components as a preventative measure. The trackball assemblies are inspected, re-shimmed if necessary, and lubricated – in some cases, these assemblies are replaced and, in that case, we will advertise the units as having new trackball assemblies installed. The clear front lens that covers the LCD, which may be acrylic or glass, is bonded to the bezel with adhesive tape or adhesive sealant. If this bond fails, any water that hits the front of the unit will run down the glass into the unit and the unit will fail in short order. We inspect this bond and if we don’t feel the bond is fit for re-installation, we will either re-bond the lens.
In addition to these things, on all Navnets regardless of whether they’re rebuilt or not, we inspect bezels for warping, inspect and regrease case seals, service trackballs, and perform other basic procedures to ensure customer satisfaction and longevity of our units in the field.
An MME refurbished Navnet display will always come with a completely rebuilt LCD screen and backlight inverter.
What’s Included: FURUNO RDP-149 DISPLAY – 10.4″ – The unit has a rebuilt backlight and LCD installed. Great condition
Suncover
Compatible Parts: rsb-0071
etr-6/10n
gp-320b
Dimensions (L x W x H): 16 x 16 x 16 in, Weight: 14 lbs
Shipping Info: Free shipping applies to items being delivered within the contiguous United States (lower 48). HI, AK, PR, and all other US Territories, and International locations will have shipping calculated during checkout.
Return Info: 30-Day Returns
Warranty Info: 90-Day Warranty
Terms:
All items sold at Max Marine Electronics come as you see in the pictures provided, with only the parts and accessories stated in the description section named “What’s Included”. IF YOU DO NOT SEE SOMETHING YOU EXPECT TO BE INCLUDED IN THE DESCRIPTION WE PROVIDE, IT WILL NOT BE INCLUDED. Read all descriptions thoroughly. There are times a display is used only to show the item being sold is functional and working properly. In this case, these displays are not included. If you have any questions feel free to send a message or call Max Marine Electronics Inc, Pompano Beach, Florida. We always want to be transparent with our customers and fully disclose any information regarding the products we sell.
