Tests good on our test set, impedance is well within acceptable range. About 18′ of transducer cable. Please note: there is one small nick in the outer insulation of the transducer cable – this does not penetrate past the outer shield and certainly not into the inner conductors or inner insulation but is mentioned in the spirit of full disclosure. We would suggest heat shrink or liquid electrical tape to seal the cable prior to or just after install. There are also a few areas were a rotary tool took some of the urethane casting material out during removal – this has not effect on functionality.

Free shipping in the United States.

Terms:

All items sold at Max Marine Electronics come as you see in the pictures provided, with ONLY the parts and accessories shown in the pictures. Do not assume any additional items will be included in your shipment. IF YOU DO NOT SEE SOMETHING YOU EXPECT TO BE INCLUDED IN THE PICTURES WE PROVIDE, IT WILL NOT BE INCLUDED. Read all descriptions thoroughly. There are times a display is used ONLY to show the item being sold is functional and working properly. In this case these displays ARE NOT included, this will be stated in our descriptions. If you have ANY questions feel free to send a message or call Max Marine Electronics Inc, Pompano Beach, Florida. We always want to be transparent with our customers and fully disclose any information regarding the products we sell.