This Furuno RDP-139/VX1 and 6-kW Radar (1943C/NT) has been bench-tested and verified to be fully functional. This system includes a 5-foot, 3-pin power cable for the display, and a new 30-foot signal cable to connect the display to the scanner/antenna unit.

The NAVnet RDP-139 included in this system has undergone the same extensive process that every NAVnet we sell goes through- the front bezel has been inspected for warping, the viewing window secured to the front bezel, the backlight PCB reconditioned with beefier components, the trackball and its housing cleaned and serviced, the case gasket cleaned and re-greased, and the software updated to the latest version for optimal performance.

The components of this system are in good overall condition. They show some signs of past usage. The anti-reflective coating on the display's viewing window was badly damaged, so it was removed. The signal cable had a small nick in its jacket, so a piece of heat-shrink was placed over it. These and any other blemishes are strictly cosmetic and do not affect its operation.

The display in this system is formatted for C-MAP chart cards. It will NOT work with Navionics cards; however, it can be converted upon purchase. Please let us know at the time of purchase if you would like us to convert the software, and we will do so at no extra charge.

***PLEASE NOTE: This system was tested using shop equipment. It requires a GPS antenna (i.e., GP-320B) to receive position data, a sounder module (i.e., ETR-6/10N) and a transducer for the sounder function to work, a heading sensor for heading, etc. These peripherals are NOT included, but may be purchased from us or other sellers. This system will function as a basic stand-alone radar without these additional pieces of equipment.***

*This system does not include mounting equipment for the display or radar.*