This Furuno RDP-149/VX2 and 4-kW Radome (1834C/NT) have been bench-tested and verified to be fully functional. This system includes a 7-foot 3-pin power cable for the display, a 48-foot signal cable for connecting the display to the scanner/antenna unit, and a set of four mounting bolts for installing the radome.

The NAVnet RDP-149 included in this system has undergone the same extensive process that every NAVnet we sell goes through- the front bezel has been inspected for warping, the viewing window secured to the front bezel, the backlight PCB reconditioned with beefier components, the trackball and its housing cleaned and serviced, the case gasket cleaned and re-greased, and the software updated to the latest version for optimal performance.

The components of this system are in good overall condition. The display and radome show cosmetic signs of past use. The inside of the display's viewing window has a faint haze remaining from removing the anti-reflective coating- this is visible from a certain angle when the display is off, but not visible while it is powered on. There are some missing spots on the radome's decals as well. These blemishes do not affect the system's performance at all.

The display in this system is formatted for Navionics chart cards. It will NOT work with C-MAP cards; however, it can be converted upon purchase. Please let us know at the time of purchase if you would like us to convert the software, and we will do so at no extra charge.

***PLEASE NOTE: This system was tested using shop equipment. It requires a GPS antenna (GP-320B) to receive position data, a sounder module (ETR-6/10N) and a transducer for the sounder function to work, a heading sensor for heading, etc. These peripherals are NOT included, but may be purchased from us or other sellers. This system will function as a basic stand-alone radar without these additional pieces of equipment.***

*This system does not include mounting equipment for the display or radar.*