Manufacturer: E-T-A Elektrotechnische Apparate GmbH
Model Number: 8345-E12B-V0M2-DB1B2C
Series: 8345
MPN: 8345-E12B-V0M2-DB1B2C
Listed Item Condition: New/New Other
Summary
- The E-T-A 8345-E12B-V0M2-DB1B2C is a 5A hydraulic-magnetic circuit breaker assembly designed for overcurrent protection in compatible industrial electrical distribution, switching, and control equipment. This assembly features a two-pole breaker configuration, manually operated toggle actuator, AC medium-delay trip characteristics, auxiliary contact module, and an additional wired control module.
- The circuit breaker is marked 5A and carries manufacturer approval markings for AC 415V, AC 240V, and AC 480V applications. The exact applicable operating voltage and approval configuration must be verified for the intended installation.
- The assembly includes a black molded insulating housing, metal terminal connection straps, threaded terminal hardware, an attached auxiliary wiring harness with multi-pin connector, and additional auxiliary terminal connections.
- The unit shows cosmetic signs of storage or handling, including minor surface scuffs and marks on the metal components. Previous installation and operating history have not been verified. The breaker has not been independently electrically tested.
- This is a multiple quantity listing and the unit that you will receive may be different than the unit shown, but is in the same cosmetic condition. Please review all photos for the exact item, condition, and components included.
Product Description
- The E-T-A 8345-E12B-V0M2-DB1B2C is a specialized 8345-series hydraulic-magnetic circuit breaker assembly designed for circuit protection and switching applications in compatible electrical distribution and industrial control systems.
- Manufactured by E-T-A Elektrotechnische Apparate GmbH in Germany, the 8345 series uses hydraulic-magnetic protection technology to provide controlled overcurrent response based on the manufacturer's specified time-current characteristics.
- Hydraulic-magnetic circuit breakers combine an electromagnetic sensing mechanism with a hydraulic delay element to provide protection against overload conditions while maintaining consistent operating characteristics across a range of ambient temperatures.
- This assembly incorporates two main protected breaker poles and a manually operated toggle mechanism.
- The manufacturer identification label specifies a rated current of 5 amperes. The M2 designation corresponds to an AC medium-delay trip characteristic for 50/60Hz operation according to E-T-A's 8345-series technical documentation.
- The breaker carries electrical approval markings for AC 415V, AC 240V, and AC 480V. These markings relate to the applicable approval and certification systems. The maximum usable operating voltage depends on the specific installation and approval requirements.
- The assembly includes two main power connection paths with metal terminal straps, threaded terminal studs, nuts, and washers.
- The attached metal connection straps feature mounting holes for bolted electrical connections. The metal components are separated by insulating barriers.
- An auxiliary contact module is attached to the breaker assembly. The auxiliary module marking is X8345-S-02-K-W1-02-M.
- E-T-A's ordering documentation identifies this auxiliary contact configuration as a changeover-contact module with one auxiliary contact set.
- An additional module is attached to the breaker assembly and connected through a multi-conductor wiring harness. The additional module marking appears to be X8345-R-24-01-00-01-M.
- The additional module's exact control function and operating voltage have not been independently confirmed against manufacturer documentation. Buyers should not assume that its internal circuitry or wiring configuration is interchangeable with other X8345 modules without verification.
- The wiring harness includes factory-style terminal connections, individually identified conductors, cable ties, and a multi-pin plug connector.
- A visible wire identification sleeve carries the marking 0649-125 REV.01. Another harness marking is N36428-001.
- These identification markings are provided for reference and may relate to the original equipment assembly rather than the primary breaker model.
- The complete unit consists of an E-T-A 8345 circuit breaker combined with attached auxiliary and control components. It is being offered as one assembled unit, not as individual breaker poles or separate modules.
- The 8345 series is intended for use in compatible power supplies, switchgear, industrial process control equipment, instrumentation, and other electrical systems requiring manufacturer-specified hydraulic-magnetic circuit protection.
- The exact manufacturer part number, current rating, pole count, trip characteristic, terminal configuration, auxiliary module arrangement, and wiring must be verified when selecting this item as a replacement.
- The circuit breaker housing is black molded insulating material with a textured exterior and E-T-A manufacturer branding.
- The assembly includes exposed metallic connection components and should be installed only within equipment providing suitable electrical protection and clearances.
- The item shows minor cosmetic marks and handling wear on the housing and metal surfaces. Previous installation or operating history has not been established.
- The unit has not been independently electrically tested to verify the protective trip mechanism, auxiliary contacts, control module, or associated wiring.
- Installation and electrical verification should be completed by qualified personnel using the manufacturer's documentation and applicable electrical requirements.
- Please review all photographs carefully for the exact unit, identification labels, terminal arrangements, wiring harness, cosmetic condition, and components included.
Product Information
- Manufacturer: E-T-A Elektrotechnische Apparate GmbH
- Brand: E-T-A
- Model Number: 8345-E12B-V0M2-DB1B2C
- Series: 8345
- MPN: 8345-E12B-V0M2-DB1B2C
- Product Type: Hydraulic-Magnetic Circuit Breaker Assembly
- Nominal Current Rating: 5A
- Number of Protected Poles: 2
- Current Type: AC
- Trip Characteristic: M2 Medium Delay
- Frequency for M2 Characteristic: 50/60Hz
- Operating Mechanism: Hydraulic-Magnetic
- Actuator Type: Manual Toggle
- Main Terminal Configuration: Metal Connection Straps with Threaded Hardware
- Main Power Connections: Two Connection Paths, Four Terminal Positions
- Auxiliary Module Marking: X8345-S-02-K-W1-02-M
- Auxiliary Contact Configuration: Changeover Contact
- Additional Module Marking: X8345-R-24-01-00-01-M
- Additional Module Function: Not Independently Verified
- Wiring Harness: Attached
- Harness Connector: Multi-Pin Plug
- Harness Identification Marking: 0649-125 REV.01
- Additional Harness Marking: N36428-001
- Approval Markings: AC 415V / AC 240V / AC 480V
- Mounting Style: Panel Mount
- Housing Color: Black
- Housing Material: Molded Insulating Material
- Country of Origin: Germany
- Manufacturer Location Marking: D-90518 Altdorf
- Additional Label Code: 7207
- Cosmetic Condition: Minor Surface Scuffs and Handling Marks
- Installation History: Not Verified
- Usage History: Not Verified
- Operational Testing: Not Independently Tested
Included
- (1) E-T-A 8345-E12B-V0M2-DB1B2C 5A Circuit Breaker Assembly
- Attached Auxiliary Contact Module
- Attached Additional Control Module
- Attached Wiring Harness with Multi-Pin Connector
- Installed Metal Terminal Connection Straps
- Installed Threaded Terminal Studs, Nuts and Washers
- Factory-Attached Toggle Actuator
- All Components Attached to the Assembly as Shown in Photographs
Not Included
- Electrical Distribution Panel or Enclosure
- External Power Wiring
- Additional Mating Connector or External Control Equipment
- Additional Mounting Hardware Not Attached to the Assembly
- Installation or Wiring Instructions
- Original Manufacturer Packaging
- Additional Accessories Not Shown in Photographs
What's Included:
- (1) E-T-A 8345-E12B-V0M2-DB1B2C 5A Circuit Breaker Assembly
- Attached Auxiliary Contact Module
- Attached Additional Control Module
- Attached Wiring Harness with Multi-Pin Connector
- Installed Metal Terminal Connection Straps
- Installed Threaded Terminal Studs, Nuts and Washers
- Factory-Attached Toggle Actuator
- All Components Attached to the Assembly as Shown in Photographs
Compatible Parts: