Manufacturer: Carling Technologies / Carling Switch
Model Number: CA2-X0-06-776-32A-D
Series: C-SERIES
MPN: CA2-X0-06-776-32A-D
Listed Item Condition: New/New Other
Summary
- The Carling Technologies CA2-X0-06-776-32A-D is a C-Series 70-amp, 2-pole hydraulic-magnetic circuit breaker designed for electrical circuit protection in compatible marine, industrial, and commercial equipment. Rated for 250V AC maximum at 50/60Hz, this breaker features a mechanically linked dual-pole toggle actuator, heavy-duty stud terminals, and a delay 24 trip configuration.
- These breakers are new old stock (NOS), never used or installed. Due to extended warehouse storage and handling, the exterior housings and identification labels may exhibit minor cosmetic wear, surface scratches, accumulated dust, or light discoloration. These storage-related imperfections do not indicate previous installation or service. The breakers have not been independently electrically tested.
- This is a multiple quantity listing. All available breakers have the same manufacturer part number, electrical specifications, and functional configuration; however, individual units may have different serial, production, or identification codes printed on their labels.
- The unit you receive may differ from the unit pictured but will be the same model with the same specifications and in comparable cosmetic condition. Please review all photos for representative examples of the item, its condition, and components included.
Product Description
- The Carling Technologies CA2-X0-06-776-32A-D is a heavy-duty C-Series hydraulic-magnetic circuit breaker designed to provide overcurrent protection in compatible electrical distribution systems.
- Carling's C-Series circuit breakers are manufactured for applications requiring higher current-handling capability in a compact, mechanically durable housing. The series is commonly used in marine electrical systems, industrial control equipment, telecommunications installations, generators, and other electrical power distribution applications.
- This particular model features a 70-amp current rating and two-pole construction, allowing two electrical conductors to be protected through a mechanically linked circuit breaker assembly.
- The breaker uses hydraulic-magnetic overcurrent protection technology. Unlike conventional thermal breakers, hydraulic-magnetic devices use an electromagnetic sensing mechanism with a hydraulic time-delay element to respond to overload conditions.
- This operating principle provides relatively stable trip performance across variations in ambient temperature and allows the breaker to protect against sustained overloads and high-current fault conditions according to its specified trip characteristics.
- The CA2-X0-06-776-32A-D carries a maximum voltage marking of 250V AC and a frequency rating of 50/60Hz. The manufacturer's identification label also specifies Delay 24, Circuit B0, and a marked trip current of 87.5 amps.
- The Delay 24 designation identifies the breaker's time-delay characteristic. It should not be confused with a 24-volt operating requirement.
- The breaker includes two mechanically linked toggle actuators, allowing both poles to be operated together. The housing incorporates a black molded body with heavy-duty metal mounting and terminal components.
- Electrical connections are made using threaded stud terminals with nuts and washers. The terminals are marked for line and load connections, and correct wiring orientation should follow the manufacturer's specifications.
- The breaker is designed for panel mounting within a compatible electrical enclosure. The C-Series construction supports installation in suitable equipment panels and power distribution assemblies using the correct mounting hardware and electrical clearances.
- The identification label includes a marked interrupting-current value of 1500A and applicable electrical approval symbols. Buyers should verify the exact approval and interrupting rating required by their application before installation.
- The circuit breaker is suitable as a replacement for an existing unit carrying the same manufacturer part number, provided the equipment's electrical requirements and applicable safety standards are satisfied.
- This listing is for the exact Carling model CA2-X0-06-776-32A-D. Other Carling CA2-series breakers may have different trip curves, current ratings, voltage ratings, terminal configurations, or approval codes and should not automatically be considered interchangeable.
- These units are new old stock and have never been used or installed. They have been held in warehouse inventory and may show surface dust, handling marks, minor abrasions, or cosmetic discoloration consistent with extended storage.
- The identification labels may also show varying degrees of age-related wear or fading. Cosmetic appearance can vary slightly between individual breakers.
- This is a multiple quantity listing. Individual units may display different serial, manufacturing, lot, or production identification codes, but all units offered under this listing have the same CA2-X0-06-776-32A-D manufacturer part number and marked electrical specifications.
- The photographs show representative units from the available inventory. The breaker shipped may not be the identical unit pictured but will be the same model and in comparable cosmetic condition.
- These breakers have not been independently electrically tested. Installation and verification should be completed by qualified electrical personnel familiar with the applicable equipment and circuit protection requirements.
Product Information
- Manufacturer: Carling Technologies
- Brand: Carling Switch
- Model Number: CA2-X0-06-776-32A-D
- Series: C-Series
- MPN: CA2-X0-06-776-32A-D
- Product Type: Hydraulic-Magnetic Circuit Breaker
- Number of Poles: 2
- Current Rating: 70A
- Maximum Marked Operating Voltage: 250V AC
- Operating Frequency: 50/60Hz
- Marked Trip Current: 87.5A
- Time Delay Code: 24
- Circuit Code: B0
- Marked Interrupting Current (Icn): 1500A
- Actuator Type: Dual Toggle with Mechanical Handle Tie
- Mounting Type: Panel Mount
- Terminal Type: Threaded Stud with Nuts and Washers
- Line and Load Markings: Yes
- Housing Color: Black
- Housing Material: Molded Insulating Material
- Approval Symbols: UL Recognized, CSA and VDE Markings Visible
- Country of Origin: Mexico
- Additional Label Code: 206-267
- Individual Identification Codes: May Vary
- Condition: New Old Stock (NOS)
- Usage History: Never Used
- Installation History: Never Installed
- Cosmetic Condition: Warehouse Storage Wear and Dust
- Operational Testing: Not Independently Tested
- Original Packaging: Not Included
- Quantity Per Purchase: 1
- Listing Type: Multiple Quantity
Included
- (1) Carling Switch CA2-X0-06-776-32A-D 70A 2-Pole Hydraulic-Magnetic Circuit Breaker
- Attached Toggle Actuator Assembly
- Installed Terminal Studs, Nuts and Washers as Pictured
Not Included
- Original Manufacturer Packaging
- Additional Mounting Hardware Not Attached to the Breaker
- External Electrical Wiring or Cables
- Electrical Panel or Enclosure
- Additional Accessories Not Shown in Photos
What's Included:
- (1) Carling Switch CA2-X0-06-776-32A-D 70A 2-Pole Hydraulic-Magnetic Circuit Breaker
- Attached Toggle Actuator Assembly
- Installed Terminal Studs, Nuts and Washers as Pictured
Compatible Parts: