This is an M260 that was removed from a boat being refit with new electronics.

The XID (transducer ID) function on this M260 is not functional – you will need to setup the GSD22 manually by following the procedure outlined by Garmin for programming transducer parameters manually. You will access the field service menu, do a manual transducer configuration, and set 50 khz to 1000w and 250 ohm, and 200 khz to 1000w and 90 ohm.

Aside from the XID issue, the transducer tests good on the TDT1000, which is Airmar’s latest/greatest transducer test set.

Please note that if using with displays with internal sounder (like the 740s), you may not be able to do a manual configuration. We only know for a fact that this can be done on the GSD22 and GSD24 – you can use this with the GSD24 if you cut the plug off and add the 8-way wire block adapter.

Ships free in the US. Thanks for looking!

Terms:

All items sold at Max Marine Electronics come as you see in the pictures provided, with ONLY the parts and accessories shown in the pictures. Do not assume any additional items will be included in your shipment. IF YOU DO NOT SEE SOMETHING YOU EXPECT TO BE INCLUDED IN THE PICTURES WE PROVIDE, IT WILL NOT BE INCLUDED. Read all descriptions thoroughly. There are times a display is used ONLY to show the item being sold is functional and working properly. In this case these displays ARE NOT included, this will be stated in our descriptions. If you have ANY questions feel free to send a message or call Max Marine Electronics Inc, Pompano Beach, Florida. We always want to be transparent with our customers and fully disclose any information regarding the products we sell.