Airmar B175H-0 Thru-Hull 0 degree, High Band CHIRP, 1000w

We recently evaluated all of our transducers with the Airmar TDT1000, which is the gold standard in transducer test equipment.

NO INSTALLATION HARDWARE OR ACCESSORIES INCLUDED – THIS WOULD BE IDEAL TO EITHER REPLACE A B164 (Same install hardware) or a defective B175H-0 where hardware can be reused.

This transducer passed testing on the high CHIRP band, water temperature sensor is functional, this transducer needed to have the nut cut off to be removed. There may be some damaged threads which may need filiing. This transducer is a “loose wire” CHIRP transducer, high band. The cable is 15′ long.

Total cable length is around 15 feet. This is for installation on deadrises of 0 to 8 degrees only. Again, no washers, no hull fastening nut included, JUST the transducer body as shown.

Free shipping in the Contiguous United States.

Terms:

All items sold at Max Marine Electronics come as you see in the pictures provided, with ONLY the parts and accessories shown in the pictures. Do not assume any additional items will be included in your shipment. IF YOU DO NOT SEE SOMETHING YOU EXPECT TO BE INCLUDED IN THE PICTURES WE PROVIDE, IT WILL NOT BE INCLUDED. Read all descriptions thoroughly. There are times a display is used ONLY to show the item being sold is functional and working properly. In this case these displays ARE NOT included, this will be stated in our descriptions. If you have ANY questions feel free to send a message or call Max Marine Electronics Inc, Pompano Beach, Florida. We always want to be transparent with our customers and fully disclose any information regarding the products we sell.