Manufacturer: Veratron
Model Number: LinkUp Gateway J1939
Series: LinkUp
MPN: B00042401
Listed Item Condition: New/New Other
Summary
- The Veratron B00042401 LinkUp J1939 Gateway is a compact marine network interface designed to convert compatible SAE J1939 engine data into NMEA 2000 information for display on compatible marine multifunction displays, digital gauges, and monitoring systems. Featuring NMEA 2000 certification, a Deutsch DT04-6P J1939 connection, and contactless smartphone configuration, this gateway provides a convenient solution for integrating engine information into modern marine electronics networks.
- The unit is powered directly through the 12V nominal NMEA 2000 network and features a rugged IPX9K-rated housing suitable for demanding marine environments. Supported engine and vessel information can include engine RPM, engine hours, coolant temperature, oil pressure, fuel level, boost pressure, and additional parameters when available from the connected J1939 system.
- This item is new old stock (NOS), brand new, never used or installed, and factory sealed in its original manufacturer packaging. The package has never been opened and the gateway has not been independently tested. Minor cosmetic wear to the exterior packaging from storage and handling may be present. Please review all photos for the exact item, condition, and packaging included.
Product Description
- The Veratron LinkUp J1939 Gateway B00042401 is a professional marine electronic interface designed to connect compatible SAE J1939 CAN bus engine systems to an NMEA 2000 marine data network. It enables supported engine operating information and diagnostic data to be transmitted to compatible multifunction displays, navigation instruments, and marine monitoring devices.
- This gateway provides a practical solution for vessels equipped with electronically controlled engines that communicate using the SAE J1939 protocol. By translating supported engine information into NMEA 2000 data, it allows compatible marine electronics equipment to display information originating from the engine management system.
- The LinkUp J1939 is designed to handle a range of supported engine and vessel parameters, including engine speed, engine operating hours, coolant temperature, engine oil pressure, engine oil temperature, transmission oil pressure, exhaust gas temperature, boost pressure, fuel level, battery information, and other supported J1939 data. Available information depends on the connected engine and its transmitted data.
- The gateway features an SAE J1939 input connection using a six-position Deutsch DT04-6P male connector. The NMEA 2000 network connection uses a standard five-pin M12 connector, allowing integration with compatible NMEA 2000 cabling and backbone equipment.
- The module receives its operating power directly from the NMEA 2000 network. It operates at a nominal 12V DC and has a maximum current consumption of approximately 100mA. A separate external power supply is not required when connected to a properly powered NMEA 2000 network.
- Veratron designed the LinkUp family with contactless wireless configuration technology. Using the compatible LinkUp Configurator mobile application, installers can configure supported parameters and device settings through a compatible smartphone without requiring a traditional wired programming interface.
- The gateway also includes a status LED for basic operational indication, helping installers identify device activity and configuration status.
- Its compact sealed housing is designed for demanding marine environments. Veratron specifies an IPX9K protection rating and an operating temperature range from -30°C to +80°C. The manufacturer also identifies the LinkUp housing as suitable for applicable engine compartment installations according to ISO 8846:1990.
- The device measures approximately 125mm x 32mm, excluding attached cables. Manufacturer specifications identify two cable leads approximately 25cm long, providing flexibility for installation near compatible engine connections and NMEA 2000 network equipment.
- The gateway is suitable for marine engine monitoring, vessel instrumentation upgrades, NMEA 2000 network integration, marine electronics replacement installations, and other applications requiring supported SAE J1939 information to be available on an NMEA 2000 network.
- Special engine adapter cables are available separately for certain Volvo Penta and Yanmar applications. Buyers should verify compatibility with their engine, connector arrangement, network configuration, and display equipment before purchasing.
- IMPORTANT: This device converts supported SAE J1939 data into NMEA 2000 information. It is not a standalone engine sensor, multifunction display, or complete NMEA 2000 network kit. A compatible J1939 data source and an appropriately powered NMEA 2000 network are required.
- This item is new old stock, never opened or installed, and supplied in its original factory-sealed packaging. Because the package remains sealed, the unit has not been independently powered on or function-tested.
Product Information
- Manufacturer: Veratron
- Model Number: LinkUp Gateway J1939
- Series: LinkUp
- MPN: B00042401
- Product Type: Marine Engine Data Gateway
- Device Function: SAE J1939 to NMEA 2000 Conversion
- Input Protocol: SAE J1939
- Output Protocol: NMEA 2000
- Supported Network Type: Marine CAN Bus
- NMEA 2000 Certification: Yes
- Nominal Operating Voltage: 12V DC
- Power Source: NMEA 2000 Backbone
- Maximum Current Consumption: 100mA
- External Power Supply Required: No
- J1939 Connector: Deutsch DT04-6P Male
- NMEA 2000 Connector: M12 5-Pin
- Wireless Configuration: Supported
- Wireless Interface: AirWave Ready
- Configuration Method: Veratron LinkUp Configurator Mobile App
- Status Indicator: LED
- Ingress Protection: IPX9K
- Operating Temperature Range: -30°C to +80°C
- Device Dimensions: 125mm x 32mm, Excluding Cables
- Manufacturer Cable Length: 2 x 25cm
- Supported Engine Data: Engine RPM, Engine Hours, Coolant Temperature, Oil Pressure, Oil Temperature, Exhaust Temperature, Boost Pressure, Fuel Level and Other Supported J1939 Parameters
- Engine Compartment Installation: Manufacturer Specifies ISO 8846:1990 Compliance
- Environmental Compliance: CE / REACH / RoHS
- Optional Volvo Penta Adapter Cable: B00102701
- Optional Yanmar Adapter Cable: B00102801
- Housing Color: Black
- Country of Origin: Switzerland
- Condition: New Old Stock (NOS)
- Packaging: Original Factory-Sealed Packaging
- Installation History: Never Installed
- Independent Testing: Not Performed
- Quantity Per Purchase: 1
Included
- (1) Veratron B00042401 LinkUp J1939 to NMEA 2000 Gateway
- (1) Original Unopened Manufacturer Package
- Manufacturer-Integrated J1939 and NMEA 2000 Connection Leads
Not Included
- NMEA 2000 Backbone or Starter Kit
- External NMEA 2000 Network Power Components
- Marine Multifunction Display or Digital Gauge
- Engine Management System
- Volvo Penta Adapter Cable B00102701
- Yanmar Adapter Cable B00102801
- Additional Installation Accessories Not Specified in the Manufacturer Packaging
What's Included:
- (1) Veratron B00042401 LinkUp J1939 to NMEA 2000 Gateway
- (1) Original Unopened Manufacturer Package
- Manufacturer-Integrated J1939 and NMEA 2000 Connection Leads