Summary

• DAYTON 1A484E general purpose electromechanical relay featuring a 12V DC operating coil, 8-pin octal plug-in connection, and double-pole double-throw (DPDT) contact configuration for industrial electrical control and switching applications.
• The relay provides two independent changeover contact sets for controlling compatible electrical circuits. Published ratings for the exact 1A484E model include 12A at 120V AC, 10A at 250V AC, and 10A at 28V DC, subject to applicable load and installation requirements.
• The octal plug-in design allows the relay to be installed into a compatible 8-pin relay socket, making it suitable for electrical control cabinets, industrial equipment maintenance, machinery control, and replacement applications.
• Listing is for the DAYTON 1A484E relay only, does not include a relay socket, DIN rail, wiring, instructions, installation screws, or original box. Please review all photos for the exact item, condition, and components included.
• This item was sourced from a new, uncommissioned equipment cabinet that was dismantled prior to being placed into service.

Product Description

• The DAYTON 1A484E is an 8-pin octal plug-in electromechanical relay designed for general-purpose electrical switching in industrial control systems, machinery, and compatible automation applications.
• The relay operates using a nominal 12V DC coil. When the coil is energized, the internal switching mechanism changes the position of two independent sets of contacts, allowing compatible electrical circuits to be switched simultaneously.
• Its double-pole double-throw contact arrangement, also identified as DPDT or 2 Form C, provides normally open, normally closed, and common connections for each pole.
• The exact-model relay has published contact ratings of 12A at 120V AC and 10A at 250V AC. Additional published specifications identify a 10A contact rating at 28V DC. These ratings apply to the specified types of loads and should not be assumed interchangeable across different voltages or applications.
• The relay also carries motor-load ratings of 1/3 HP at 120V AC and 1/2 HP at 240V AC, according to published DAYTON product-family specifications.
• The 8-pin octal configuration is intended for use with compatible plug-in relay sockets, providing a convenient connection method for control panel assembly, service, and replacement.
• The plug-in construction allows the relay to be removed from a suitable socket without disconnecting every external circuit conductor. The relay socket itself is not included.
• The contact system uses silver-alloy contact material in the documented DAYTON relay family, supporting general-purpose electrical switching under specified electrical load conditions.
• This relay is suitable for applications requiring a 12V DC control signal to operate two changeover contact circuits, including machinery control, industrial equipment repair, signaling, and electrical cabinet maintenance.
• The DAYTON 1A484E is an electromechanical switching component and does not independently provide overload protection, circuit-breaker functionality, timing logic, or programmable control.
• Before installation, confirm the correct coil voltage, octal pin arrangement, relay socket compatibility, load type, and applicable electrical ratings.

Product Information

• Brand: DAYTON
• Manufacturer: DAYTON
• Model Number: 1A484E
• Series: A Series
• MPN: 1A484E
• Type: General Purpose Electromechanical Relay
• Relay Configuration: DPDT
• Contact Form: 2 Form C
• Number of Poles: 2
• Number of Changeover Contact Sets: 2
• Number of Pins: 8
• Base Configuration: Octal
• Coil Voltage: 12V DC
• Coil Current Type: DC
• Contact Rating at 120V AC: 12A
• Contact Rating at 250V AC: 10A
• Contact Rating at 28V DC: 10A
• Motor Rating at 120V AC: 1/3 HP
• Motor Rating at 240V AC: 1/2 HP
• Mounting Style: Socket-Mounted Plug-In
• Electrical Connection: 8-Pin Octal Plug-In
• Contact Material: Silver Alloy (Related DAYTON A-Series Specifications)
• Compatible Socket: Appropriate 8-Pin Octal Relay Socket
• Integrated Programmable Controller: No
• Integrated Circuit Breaker: No
• Integrated Overload Protection: Not Verified
• Manufacturer Country of Origin: China (Related DAYTON A-Series Catalog; Verify Actual Label)
• Unit Quantity: 1
• Unit Type: Unit

Included

• 1x DAYTON 1A484E General Purpose Relay, 12V DC Coil, DPDT, 8-Pin Octal Plug-In

Not Included

• 8-Pin Octal Relay Socket or Base
• DIN Rail
• External Wiring or Cables
• Power Supply
• Additional Relays
• Installation Screws
• Installation Instructions
• Original Manufacturer Packaging
• Other Electrical Accessories

Please review all photos for the exact item, condition, and components included.