Manufacturer: Noland Engineering
Model Number: SX14
Series: SX
MPN: SX14
Listed Item Condition: New/New Other
Summary
- The Noland Engineering SX14 is a marine NMEA 0183 data expander designed to distribute a single navigation or instrumentation data signal to four independent receiving devices. Featuring one optically isolated input and four individually driven outputs, the SX14 helps improve signal distribution and reliability in marine electronics installations with multiple NMEA 0183 listeners.
- The unit supports communication speeds up to 38,400 baud and is compatible with NMEA 0183 RS-422 and supported RS-232 receiving equipment. Its independent output circuits provide protection against short circuits, while integrated green data and yellow fault indicators provide visual operating status.
- Please review all product photos for the exact physical condition, included components, and terminal connections. The condition and operational testing status of this particular unit have not yet been confirmed.
Product Description
- The Noland Engineering SX14 NMEA 0183 Expander is a compact marine data distribution module designed to solve communication problems in navigation and instrumentation systems that require one NMEA 0183 data source to communicate with multiple receiving devices.
- Many marine electronic instruments provide an NMEA 0183 output capable of driving only a limited number of connected devices. When too many listeners are connected to one output, the transmitting device may be unable to maintain the required signal levels, resulting in unreliable or interrupted data communication.
- The SX14 addresses this problem by accepting one NMEA 0183 input and reproducing the incoming data across four independently driven outputs. This enables a compatible GPS receiver, chartplotter, navigation instrument, or other NMEA 0183 data source to supply information to multiple listening devices without requiring them to share a single unbuffered output.
- The input incorporates optical isolation to provide electrical separation between the incoming data source and the expander circuitry. The four output channels are independently driven, allowing each output to connect to compatible RS-422 or RS-232 listeners.
- Each output includes independent protection against short circuits, electrical surges, and lightning-related transients. If one output becomes shorted, the remaining output channels are designed to continue operating normally.
- The SX14 supports NMEA 0183 communication rates up to 38,400 baud, making it suitable for standard and higher-speed NMEA 0183 data applications when configured with compatible equipment.
- The unit features two status indicators. A green LED indicates data activity, while a yellow LED provides an overcurrent or fault indication. These indicators can assist installers and technicians with monitoring operation and identifying wiring problems.
- Designed for marine electrical systems, the expander operates from a 10V to 30V DC supply. Its efficient internal power conversion system provides very low standby current consumption, approximately 5mA under typical no-load conditions. Maximum manufacturer-listed operating current is approximately 50mA under full load.
- The compact water-resistant housing measures approximately 3.5 inches by 2.0 inches by 0.9 inches and includes a protective cover for the electrical connections. The unit weighs approximately 2 ounces, making it suitable for mounting in protected marine electronics installations.
- Typical applications include distributing GPS navigation information, connecting multiple NMEA 0183 displays or instruments, marine autopilot integration, and expanding serial data connections in existing vessel electronics systems.
- The SX14 is a one-input, four-output signal expander. It does not combine multiple independent NMEA data sources into one output and is not an NMEA 0183 to NMEA 2000 protocol converter.
- This listing is for the Noland Engineering SX14 NMEA 0183 Expander. Installation requires a suitable external DC power source and appropriate wiring to the compatible navigation or instrumentation equipment.
- The condition and independent testing status of this particular unit have not yet been confirmed. Please review all photos for the exact item, cosmetic condition, and components included.
Product Information
- Manufacturer: Noland Engineering
- Model Number: SX14
- Series: SX
- MPN: SX14
- Product Type: Marine NMEA 0183 Data Expander
- Primary Function: Serial Data Signal Distribution
- Communication Protocol: NMEA 0183
- Number of Data Inputs: 1
- Number of Data Outputs: 4
- Input Isolation: Optically Isolated
- Output Configuration: Four Independent Buffered Outputs
- Compatible Receiving Interfaces: RS-422 / RS-232
- Maximum Data Rate: 38,400 Baud
- Input Sensitivity: 2V Differential
- Typical Output Level: 3.5V Into 500 Ohms
- Operating Supply Voltage: 10-30V DC
- Typical Standby Current: Approximately 5mA
- Full Load Current: 50mA
- Output Short Circuit Protection: Yes
- Output Surge Protection: Yes
- Lightning Transient Protection: Yes
- Data Activity Indicator: Green LED
- Overcurrent / Fault Indicator: Yellow LED
- Connection Type: Terminal Block
- Enclosure Protection: Water Resistant (IP Rating Not Verified)
- Operating Temperature Range: -20°C to +70°C
- Humidity Range: 0-100% Non-Condensing
- Item Length: 3.5 in
- Item Width: 2.0 in
- Item Height: 0.9 in
- Approximate Net Weight: 2 oz
- Country of Origin: United States
- Condition: Not Confirmed
- Operational Testing: Not Verified
- Quantity Per Purchase: 1
Included
- (1) Noland Engineering SX14 NMEA 0183 Expander
Not Included
- External 10-30V DC Power Supply
- Marine GPS Receiver or Chartplotter
- Autopilot or Other NMEA 0183 Equipment
- External Signal and Power Wiring
- Additional Mounting Hardware or Accessories Not Shown in Photos
What's Included:
- (1) Noland Engineering SX14 NMEA 0183 Expander