Manufacturer: Airmar

Model Number: R109c-LH

Series: External Mount Transducers

MPN: 41-442-1-03

Condition: Used

Additional Notes: This was removed from a boat that was refit with new electronics and a new transducer during haul-out. It has very low hours, only 102 hours as can be seen in the test report. The test report was created by Max Marine Electronics, an Airmar Certified Installer, using a TDT1000, the gold standard in transducer diagnostics. This transducer is backordered until at least November

This transducer is in working condition, it was installed on a wet slipped boat so the bottom of the transducer has its fair share of scuffs, but nothing that affects functionality. We removed most of the growth by sanding it off, the transducer is ready for a fresh coat of transducer paint on the face, and bottom paint on the sides.

We are including the fairing block – it is cut to 18 degrees. The bottom half on the transducer is perfect, the top half that goes inside the boat was modified to clear obstructions as is seen in the photos. To remove the block without damaging it would require a lot of debond, time, and luck. We left it on as we would destroy the block if we tried.

If you need a new fairing block, the part number is 04-482-03. We can order it for an additional $347 with the purchase of the transducer.

This includes a complete used stuffing tube kit and mounting studs – essentially, everything needed to install other than sealant.

This will work with the following units by adding the following parts:

For Garmin – Works with the GSD26 – just wire to the terminals

For Raymarine CP470 & CP570 – Use Airmar’s 33-969-01 adapter box

For Furuno DFF3, DFF3-UHD, and DI-FISHAMP – just wire to the terminals

For Simrad – BSM2, BSM3, and S5100 – wire directly to the terminals, you may need to remove the 7 pin plugs on the BSM-3 if equip to wire directly. For the S5100, use the Simrad 000-13262-001 adapter box.

Thanks for looking!

What’s Included:

• R109c-LH Transducer
• Fairing Block – Used – Cut 18 Degrees – Modified Top
• Stuffing Tube Kit
• Studs, nuts, washers
• Installation instructions

Compatible Parts: Garmin GSD26
Raymarine CP470 & CP570
Furuno – DFF3, DFF3-UHD, and DI-FISHAMP
Simrad – BSM2, BSM3, and S5100

Dimensions (L x W x H): 22 x 12 x 6 in, Weight: 45 lbs

Shipping Info: Free shipping applies to items being delivered within the contiguous United States (lower 48). HI, AK, PR, and all other US Territories, and International locations will have shipping calculated during checkout.

Return Info: 30-Day Returns

Warranty Info: 90-Day Warranty

Terms:

All items sold at Max Marine Electronics come as you see in the pictures provided, with only the parts and accessories stated in the description section named “What’s Included”. IF YOU DO NOT SEE SOMETHING YOU EXPECT TO BE INCLUDED IN THE DESCRIPTION WE PROVIDE, IT WILL NOT BE INCLUDED. Read all descriptions thoroughly. There are times a display is used only to show the item being sold is functional and working properly. In this case, these displays are not included. If you have any questions feel free to send a message or call Max Marine Electronics Inc, Pompano Beach, Florida. We always want to be transparent with our customers and fully disclose any information regarding the products we sell.