This is an M260-10F that was removed from a boat being refit with new electronics. It was actually a TM260 transducer body which is equivalent to the M260 with the exception that the TM260 also has water temperature. This functionality won’t be used since it is a tank install but you have the flexibility of converting to a transom mount down the line if desired.

The transducer was tested on the TDT1000, the gold standard in transducer test equipment. The transducer is well within factory specs and is ready for installation. This includes:

-M260 transducer w/10 pin Furuno Mix&Match Cable – Total cable length ~30 feet

-Yellow tank & Metal Top (will need to be cut to the proper deadrise)

-New Gasket

-Hardware

-Cork Liner

Terms:

All items sold at Max Marine Electronics come as you see in the pictures provided, with ONLY the parts and accessories shown in the pictures. Do not assume any additional items will be included in your shipment. IF YOU DO NOT SEE SOMETHING YOU EXPECT TO BE INCLUDED IN THE PICTURES WE PROVIDE, IT WILL NOT BE INCLUDED. Read all descriptions thoroughly. There are times a display is used ONLY to show the item being sold is functional and working properly. In this case these displays ARE NOT included, this will be stated in our descriptions. If you have ANY questions feel free to send a message or call Max Marine Electronics Inc, Pompano Beach, Florida. We always want to be transparent with our customers and fully disclose any information regarding the products we sell.