This display was acquired from a boat being refit with new electronics. We fully tested both chart card slots, both Raynet network ports, transducer port, internal GPS function and Seatalk Ng port. The unit is also updated and running the latest software version.

This listing is just for the c127 display.

Cables are NOT included

Please Note: This unit was originally a Raymarine e127, which would have included a touchscreen.  The most common and well known failure with the e1XX series is the touchscreen and digitizer. We have accumulated many of these e-series displays with bad touch, and wanted to find a way to best utilize them.  This display is what we came up with.  We disconnected the digitizer, disabling the failed touch feature.  This makes this unit essentially a C-Series display, which is identical, but did not have touch compatibility.  

This unit is fully compatible with any c-Series unit installed on your boat.  It has all the same connections, and uses the same cables.  The only difference between this unit and your original c-Series unit is the following: 

• boot-up page says e-Series instead of c-Series
• After boot-up c Series says “press ok to accept” and shows a picture of the push knob, while this display only shows “accept” button on the screen – you must use the push knob.
• This unit has “touch lock” option on the homepage – this serves no function since touch was disabled.
• This unit has “touch alignment settings” – also serves no purpose since touch was disabled. 
• This units diagnostics page shows e-Series model number.  This does not effect functionality in anyway.
• e-Series has a video in/out port, the c-series does not. 

Please note: This is what is known as a Multi-Function Display or MFD. MFD’s require peripherals to perform certain functions (i.e. radar antenna for radar, etc). These peripherals are included but they’re readily available on eBay.