Description
This is a new old stock SS264N – 200 khz – 0 degree tilt transducer. This is a low profile single frequency 200khz tilted element thru-hull with 0 degrees of tilt. Only for boats with 0-8 degrees of deadrise in the mounting location.
This was originally a Garmin 6 pin transducer, but the connector was cut off. We have Garmin 6 pin pigtails that could be spliced to. Alternatively, you can hook up to the following units in the following ways:
-Furuno 10 pin – use AIR-033-333
-Garmin 8 pin – use 8 way wire block adapter 010-11613-00
-Simrad/Lowrance Blue 7 pin – use Airmar 33-1345-01
Total cable length is around 30 feet. Install kit is included and transducer is in original box.
We do not have nor do we have the ability to get any other SS264 transducers in other tilt angles or in the high frequency configuration as the SS264 is discontinued.
This will perform similar to the high frequency element in a B260 with a similar cone angle.
Because these are single frequency, the only way to make them dual frequency is to add an SS264 50 khz transducer, but because the SS264 has been discontinued, they are hard to come by. Another option is to wire this and your existing transducer to a transducer switchbox (SB260 which is listed separately) so you can use the SS264N for high frequency work and switch to your other transducer when low frequency operation is desired.
This SS264 200 khz transducer originally sold for over $800. Because this is new old stock, it carries the Max Marine Electronics 90 day warranty but does not qualify for any manufacturer’s warranty.
Please be sure you understand what you are purchasing prior to purchasing and if you have any questions, please feel free to ask. Returns will not be permitted on transducers that have been previously installed unless it is a warranty concern.
Thanks for looking.
Ships free in the US. Thanks for looking!
Terms:
All items sold at Max Marine Electronics come as you see in the pictures provided, with ONLY the parts and accessories shown in the pictures. Do not assume any additional items will be included in your shipment. IF YOU DO NOT SEE SOMETHING YOU EXPECT TO BE INCLUDED IN THE PICTURES WE PROVIDE, IT WILL NOT BE INCLUDED. Read all descriptions thoroughly. There are times a display is used ONLY to show the item being sold is functional and working properly. In this case these displays ARE NOT included, this will be stated in our descriptions. If you have ANY questions feel free to send a message or call Max Marine Electronics Inc, Pompano Beach, Florida. We always want to be transparent with our customers and fully disclose any information regarding the products we sell.