KVH Tracvision M3 “Grab and Go” Replacement Unit, Fully Tested Working

$999.99

Out of stock

Description

KVH Tracvision M3 “Grab and Go” Replacement Unit, Fully Tested Working

This is a used KVH M3st 14.5″ Dish fully tested and tracks DIRECTV DSS 101 with no issues.

There are some small signs of slight cosmetic wear and tear on the dome and base,  light scratches on the dome and heavier scratches on the base , overall in decent shape. We are however giving a slight discount due to cosmetic shape. There is nothing wrong with this unit! it is still functional, just not as pretty as the others..

The parameters for this antenna have been set and antenna gyros have been calibrated. Weather stripping on the dome is in good shape and does not need to be replaced. Also has 4 good rubber mounting feet. The Antenna is set to track DIRECTV DSS 101. It is ready to go! (does NOT include mounting hardware)

This system includes :

QTY: 1 KVH  Tracvision M3 antenna  

QTY: 1 M10  DirecTV Receiver  W/ 1′ power cable (non-Activated) ***SEE NOTE BELOW ***  

QTY: 1 RF Remote and Antenna ( Batteries NOT included)

QTY: 1 Sonora D575 Destacker

QTY: 1 New DTV L-band DC block splitter

QTY: 1 50’ RG 6 Coax (if you need longer Coax cables please let us know)

QTY : 2 5′ RG 6 Coax cables

 

 

 

 

M10 RECEIVER DISCLOSURE

This KVH M10 Receiver has been fully tested and confirmed that it is working as a “controller” for the M3 antenna. The Receiver is not active but that does not have any effect on how it receives the signal from the DirecTV Satellite Service.

This Receiver is an MPEG-2 receiver and we are unsure as to whether or not DirecTV will activate this type of receiver – we would ask buyers to do their due diligence to ensure that they will be able to activate this receiver prior to purchase.

Also, due to broadcast changes we anticipate happening in the future by DirecTV, it is possible that the change will render this receiver no longer compatible with DirecTV DSS101. However, in this case, you should still be able to use this M10 receiver as a “controller” for a good working M3 antenna as long as you have an active HR24 or H24 DirecTV receiver on your vessel or RV installed with a KVH PN19-0423 DC block splitter and a SONORA  D575 Destacker.

DirecTV service will not be affected by the new broadcasting changes mentioned above if being used with the HR24/H24 receiver. These HR24/H24 receivers are available for purchase and activation from Solid Signal.

 

 

 

TO DOs / Recommendations :

  • Make sure the KVH M10 receiver has a good 12V dc source 
  • Verify that your settings on your Directv sat receiver are set to:  18” round dish type And multiswitch configuration.

** It is HIGHLY recommended that you have up to date Sat receivers. The models needed are 

HR24, H24, Due to DirecTV changes in broadcast! 

US Shipping is free for customers in the lower 48 states.
International freight or freight outside the lower 48 states is available upon request, please message us with specifics or questions.

 

 

Terms:

All items sold at Max Marine Electronics come as you see in the pictures provided, with ONLY the parts and accessories shown in the pictures. Do not assume any additional items will be included in your shipment. IF YOU DO NOT SEE SOMETHING YOU EXPECT TO BE INCLUDED IN THE PICTURES WE PROVIDE, IT WILL NOT BE INCLUDED. Read all descriptions thoroughly. There are times a display is used ONLY to show the item being sold is functional and working properly. In this case these displays ARE NOT included, this will be stated in our descriptions. If you have ANY questions feel free to send a message or call Max Marine Electronics Inc, Pompano Beach, Florida. We always want to be transparent with our customers and fully disclose any information regarding the products we sell.

 

Additional information

Weight 100 lbs
SKU 192866
keyboard_arrow_up